依據氣體增壓泵原理使用液壓站給液驅增壓泵提供動力源，從而向氣體增壓泵一樣可對空氣、氮氣、氬氣、等一些惰性氣體進行增壓作業，液壓壓力與輸出壓力成正比，通過對液壓壓力的調整,可以對輸出壓力無級調節。當液壓驅區壓力與輸出壓力平衡時,液壓泵便啟動溢流閥自動溢流,輸出壓力也穩定在預設的壓力上, 果有泄露導致系統壓力下降,液壓泵會自動補壓,進行壓力補償，控制方面可使用PLC或單片機進行配套控制，整套系統具有操作簡單、可靠等特點。
主要技術參數
增壓介質: 純凈氮氣、空氣等;
輸入接口: 1/2NPT內螺紋;
輸出接口: 1/2NPT 內螺紋
驅動液體額定壓力: 140bar;
驅動液體額定流量: 70L/min;
進氣接口: NPT1/2內螺紋;
高壓壓力表量程: 0~60MPa;
壓力范圍: 30-480Bar;
管路*許用壓力: 1400Bar;
設備外形尺寸: 1160×200×180mm
According to the principle of gas booster pump, the hydraulic station is used to provide power source for the liquid driven booster pump, so as to pressurize some inert gases such as air, nitrogen, argon, etc. like the gas booster pump. The hydraulic pressure is directly proportional to the output pressure. Through the adjustment of hydraulic pressure, the output pressure can be adjusted steplessly. When the pressure in the hydraulic drive area is balanced with the output pressure, the hydraulic pump will start the overflow valve to overflow automatically, and the output pressure is also stable at the preset pressure. If the system pressure drops due to leakage, the hydraulic pump will automatically supplement the pressure for pressure compensation. In terms of control, PLC or single-chip computer can be used for supporting control. The whole system has the characteristics of simple operation, safety and reliability.
Main technical parameters
Pressurization medium: pure nitrogen, air, etc;
Input interface: 1 / 2NPT internal thread;
Output interface: 1 / 2NPT female
Rated pressure of driving liquid: 140bar;
Rated flow of driving liquid: 70L / min;
Air inlet interface: npt1 / 2 internal thread;
Range of high pressure gauge: 0 ~ 60MPa;
Pressure range: 30-480bar;
* allowable pressure of pipeline: 1400bar;
Overall dimension of equipment: 1160 ×200× 180mm
