不銹鋼對夾式止回閥-H71W/H不銹鋼對夾式止回閥主要功能水錘壓力很小,閥瓣行程短、閥瓣輕巧、具有彈簧輔助關閉、關閥速度很快。結構長度很短、體積很小、重量很輕、為閥門的安裝、搬運、存放及管道的布置帶來很大的便利，并能大量節約材料、降低造價。
不銹鋼對夾式止回閥-H71W/H不銹鋼對夾式止回閥主要技術參數：
| 型號 | 公稱壓力PN(MPa) | 試驗壓力PS(MPa) | 工作溫度(℃) | 適用介質 | |
| 殼體 | 密封 | ||||
| H71W-16T | 1.6 | 2.4 | 1.76 | ≤200 | 水、蒸體、油品等 |
| H71H-25Q | 2.5 | 3.75 | 2.75 | ≤235 | |
| H71W-25H | ≤300 | ||||
| H71W-25P | ≤200 | 硝酸等腐蝕性介質 | |||
| H71W-40H | 4.0 | 6.0 | 4.4 | ≤300 | 水、蒸體、油品等 |
| H71W-40P | ≤200 | 硝酸等腐蝕性介質 | |||
不銹鋼對夾式止回閥-H71W/H不銹鋼對夾式止回閥主要零件材料：
| 規格型號 | 閥體 | 閥瓣 | 彈簧 |
| H71H-16Q、H71H-25Q | QT400-15 | 25 | 50CrCA |
| H71W-25H、H71W-40H | 2Cr13 | 1Cr13 | 1Cr18Ni9Ti |
| H71W-16P、H71W-25P | ZG1Cr18Ni9Ti | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
流體力學性能：H71對夾升降式止回閥的流體阻力系數、流量系數及開啟壓力：
| 公稱通徑 | 閥門全開啟時的流體阻力系數 | 常溫下閥門全開啟時的水講E量系數 | 流體的流向 | |||||
| DN | NPS | Kvm3=／h | CVU.S | CVU.K | ↑ | ↓ | → | |
| 開啟壓力近似值KPa | ||||||||
| 15 | 1/2 | 6.4 | 2.6 | 3.0 | 2.5 | 3 | 2 | 2.5 |
| 20 | 3/4 | 5.1 | 6.4 | 7.5 | 6.3 | 3 | 2 | 2.5 |
| 25 | 4 | 4.1 | 12.6 | 14.8 | 12.3 | 3 | 2 | 2.5 |
| 32 | 11/4 | 4.1 | 19.7 | 23.1 | 19.3 | 3 | 2 | 2.5 |
| 40 | 11/2 | 3.8 | 29.5 | 63.9 | 28.9 | 3 | 2 | 2.5 |
| 50 | 2 | 3.5 | 54.6 | 99.9 | 63.5 | 3 | 2 | 2.5 |
| 65 | 21/2 | 3.5 | 85.4 | 150 | 83.7 | 3 | 2 | 2.5 |
| 80 | 3 | 3.2 | 128 | 286 | 125 | 3 | 2 | 2.5 |
| 100 | 4 | 2.8 | 244 | 286 | 249 | 3 | 2 | 2.5 |
| 125 | 5 | 2.9 | 375 | 439 | 368 | 3 | 1 | 2.2 |
| 150 | 6 | 3.1 | 522 | 611 | 512 | 3 | 1 | 2.2 |
| 200 | 8 | 3.2 | 915 | 1070 | 897 | 3 | 1 | 2.2 |
不銹鋼對夾式止回閥-H71W/H不銹鋼對夾式止回閥主要連接尺寸
| 公稱通徑DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| 結構長度 | 長系列 | 25 | 31.5 | 35.5 | 40 | 45 | 56 | 63 | 71 | 80 | 110 | 125 | 160 |
| 短系列 | 16 | 19 | 22 | 28 | 31.5 | 40 | 46 | 50 | 60 | 90 | 105 | 140 | |
